Your cart is currently empty.

The FITLAB 45 Degree Leg Press is a commercial plate-loaded leg press with a 550 kg max load, running on linear bearings and stainless steel rails. With a footprint of 2,400 × 1,620 mm and a height of 1,490 mm, it gives commercial gyms and PT studios a heavy-duty lower-body station with automatic racking and adjustable safety stops.
• 550 kg max load with four Olympic weight horns
• Linear bearings on stainless steel rails for smooth, quiet sled travel
• Automatic racking that disengages at the start of each set
• Dual adjustable safety stops to set the lowest sled position
• 5-position backrest with adjustable seat and headrest
• Large footplate for varied foot placement
• Commercial-grade 3 mm steel frame, electrostatic powder-coated finish. Weight plates sold separately.
|
Specification |
Details |
|
Dimensions (L × W × H) |
2,400 × 1,620 × 1,490 mm |
|
Recommended training zone |
Approx. 3.6 × 2.8 m (allows 600 mm clearance on each side) |
|
Ceiling height |
Suits a standard 2.4 m ceiling |
|
Net weight |
256 kg |
|
Packed dimensions |
2,270 × 1,120 × 850 mm |
|
Gross weight (packed) |
266 kg |
|
Max load |
550 kg (plate-loaded) |
|
Weight horns |
4 × Olympic (50 mm) |
|
Max user weight |
205 kg |
|
Frame |
Commercial-grade 3 mm steel |
|
Finish |
Electrostatic powder coat, black |
|
Sled |
Linear bearings on stainless steel rails |
|
Safety |
Automatic racking, dual adjustable safety stops |
|
Adjustments |
5-position backrest, adjustable seat and headrest |
|
Footplate |
Large, for varied foot placement |
|
Weight plates |
Not included |
|
Power |
Not required |
|
Assembly |
Partial assembly required; professional installation available |
|
SKU |
TM91 |
Warranty covers manufacturing defects and excludes normal wear and tear, misuse, modifications and incorrect installation.
|
Component |
Warranty |
|
Frame |
Lifetime |
|
Linear bearings, rails and other parts |
3 years |
|
Upholstery |
1 year |
|
Labour |
1 year |
Commercial gyms, PT studios, strength and conditioning facilities, sports clubs, and home gyms that want commercial-grade equipment.
The 45 degree angle lets users press heavy loads through the legs with the back supported and no bar on the shoulders. Foot position on the plate changes which muscles do the most work.
• Primary: quadriceps, glutes
• Secondary: hamstrings, adductors, calves
• Heavy strength blocks: load well past squat working weights with the torso supported
• Foot placement variations: high and wide for glutes and hamstrings, low and narrow for quads
• Calf raises: press through the balls of the feet on the footplate
• Single-leg sets: work each leg on its own to even out left and right strength

The machine measures 2,400 × 1,620 mm. Allowing 600 mm of clearance on each side, plan for a training zone of about 3.6 × 2.8 m, with extra room at the weight horns for loading plates.
No. Weight plates are sold separately. The machine has four Olympic weight horns and takes up to 550 kg, and suits our Olympic tri-grip and bumper plates.
The sled locks in the racked position between sets. Pressing the sled up at the start of a set disengages the racking automatically, and the dual safety stops set the lowest point the sled can travel.
Yes. It is built for commercial use, so it suits home gyms that want commercial-grade durability. Check doorway and access dimensions against the packed size of 2,270 × 1,120 × 850 mm before ordering.
We will send you an email to reset your password
Your cart is currently empty.